A Compact Multi-Band Metamaterial-Inspired Antenna Incorporating Shorting Pins

نوع مقاله : مقاله پژوهشی

نویسندگان

1 آزمایشگاه آنتن و الکترومغناطیس، دانشگاه صنعتی امیرکبیر

2 دانشگاه صنعتی امیرکبیر

چکیده

The capability of complementary capacitively-loaded-loop (CCLL) metamaterial (MTM) to miniaturize printed patch antenna is examined. The cell is etched at the antenna ground plane. The antenna is comprised of three main sections: CCLL cell, shorting pins, and a patch with the overall dimensions of 50×25 mm2. It is shown that the MTM structure exhibits a magneto-dielectric behavior at the lower frequencies. With the aid of effective material, a miniaturized printed patch antenna operating at 650 MHz is achieved. In some frequency bands, the MTM structure efficiently provides an artificial magnetic conductor (AMC). This latter feature helps to achieve efficient multi-band operation and the antenna can cover the required frequency band of the most commercial wireless communication systems, such as LTE 2500/2600 (2480 to 2730 MHz), radiolocation service (2890 to 3110 MHz) and LTE 3500/3700, WLAN 3600 (3640 to 3880 MHz). In order to validate the simulation results, a prototype of the antenna is fabricated and tested. Good agreement between the simulation and measurement results is obtained.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

A Compact Multi-Band Metamaterial-Inspired Antenna Incorporating Shorting Pins

نویسندگان [English]

  • Ali Jafargholi 1
  • Amir Jafargholi 2
1 Electromagnetic and Antenna Lab., Amirkabir University of Technology
2 Amirkabir University of Technology
چکیده [English]

The capability of complementary capacitively-loaded-loop (CCLL) metamaterial (MTM) to miniaturize printed patch antenna is examined. The cell is etched at the antenna ground plane. The antenna is comprised of three main sections: CCLL cell, shorting pins, and a patch with the overall dimensions of 50×25 mm2. It is shown that the MTM structure exhibits a magneto-dielectric behavior at the lower frequencies. With the aid of effective material, a miniaturized printed patch antenna operating at 650 MHz is achieved. In some frequency bands, the MTM structure efficiently provides an artificial magnetic conductor (AMC). This latter feature helps to achieve efficient multi-band operation and the antenna can cover the required frequency band of the most commercial wireless communication systems, such as LTE 2500/2600 (2480 to 2730 MHz), radiolocation service (2890 to 3110 MHz) and LTE 3500/3700, WLAN 3600 (3640 to 3880 MHz). In order to validate the simulation results, a prototype of the antenna is fabricated and tested. Good agreement between the simulation and measurement results is obtained.

کلیدواژه‌ها [English]

  • Compact
  • Multi-Band
  • Metamaterial-Inspired
  • Antenna
  • Shorting Pins
[1] A. Jafargholi, M. Kamyab, M. Veysi, and M. Nikfal Azar, “Microstrip gap proximity fed-patch antennas, analysis, and design,” AEU - International Journal of Electronics and Communications, vol. 66, no. 2, pp. 115-121, 2012.
[2] M. Sinha, V. Killamsetty, and B. Mukherjee, “Near Field Analysis of RDRA Loaded with Split Ring Resonators Superstrate,” Microwave and Optical Technology Letters, Wiley, vol. 60, no. 2, pp. 472-478, 2018
[3] M. Veysi, and A. Jafargholi, "Directivity and Bandwidth Enhancement of Proximity-Coupled Microstrip Antenna Using Metamaterial Cover" Applied Computational Electromagnetics Society Journal, vol. 27, no. 11, 2012.
[4] A. Jafargholi and M. H. Mazaheri, "Broadband microstrip antenna using epsilon near zero metamaterials," IET Microwaves, Antennas & Propagation, vol. 9, no. 14, pp. 1612-1617, 2015.
[5] B. Mukherjee, P. Patel, and J. Mukherjee, “A Novel hemispherical Dielectric Resonator Antenna with Complimentary Split Rings shaped slots and resonator for wideband and low cross-polar applications,” IEEE Antenna and Propagation Magazine, vol. 57, no. 1, pp. 120-128, 2015
[6] H. Mosallaei, K. Sarabandi, “Antenna miniaturization and bandwidth enhancement using a reactive impedance substrate,” IEEE Trans. Antennas. Propag., Vol. 52, pp. 2403–2414, 2004.
[7] A. Jafargholi, and M. Mohammadkhani, “Miniaturized Microstrip Antenna Using High Impedance Wires Incorporating AMC MTMs, International Journal of Electronics Lett., vol. 4, no. 4, pp. 489–496, 2016.
[8] Y. Rahmat-Samii and F. Yang, Electromagnetic Band Gap Structures in Antenna Engineering. Cambridge, U.K.: Cambridge Univ. Press, 2009.
[9] M. Rafaei Booket; M. Veysi; Z. Atlasbaf; A. Jafargholi, “Ungrounded Composite Right/Left Handed Metamaterials: Design, Synthesis, and Applications,” IET Microwave Antenna Propag., Vol. 6, No. 11, pp. 1259-1268, 2012.
[10] N. Amani, A. Jafargholi, “Zeroth-Order and TM10 Modes in One-Unit Cell CRLH Mushroom Resonator”, IEEE Antennas Wirel. Propag. Lett., Vol.14, 1396–1399, 2015.
[11] N. Amani, M. Kamyab, A. Jafargholi, A. Hosseinbeig, and J. S. Meiguni, "Compact tri-band metamaterial-inspired antenna based on CRLH resonant structures," Electronics Letters, vol. 50, no. 12, pp. 847-848, 5 June 2014.
[12] A. Erentok, P. Luljak, and R. W. Ziolkowski, “Characterization of a volumetric metamaterial realization of an artificial magnetic conductor for antenna applications,” IEEE Trans. Antennas Propagat., vol. 53, pp. 160–172, Jan. 2005.
[13] A. Jafargholi, M. Kamyab, and M. Veysi, “Artificial magnetic conductor loaded monopole antenna,” IEEE Antennas Wireless Propag. Lett., vol. 9, pp. 211–214, 2010.
[14] A. Jafargholi, and A. Jafargholi, “Miniaturization of Printed Slot Antennas Using Artificial Magnetic Conductors,” IET Microwave Antenna Propag., vol. 12, no. 7, 1054-1059, 2018.
[15] A. Jafargholi, M. Kamyab, M. Rafaei Booket, and M. Veysi, "A compact dual-band printed dipole antenna loaded with CLL-based metamaterials" International Review of Electrical Engineering, vol. 5, no. 6, 2010.
[16] A. Jafargholi, A. Jafargholi, and J. H. Choi, "Mutual Coupling Reduction in an Array of Patch Antennas Using CLL Metamaterial Superstrate for MIMO Applications," IEEE Trans. Antennas Propagat., vol. 67, no. 1, pp. 179-189, Jan. 2019.
[17] A. Jafargholi, A. Jafargholi, J. H. Choi, M. Veysi, A. Soleimani, “Microstrip Patch Back Radiation Reduction Using Metamaterial Superstrate,” IET Microwave Antenna Propag., 2019.
[18] R. W. Ziolkowski, P. Jin, and C.-C. Lin, “Metamaterial-Inspired Engineering of Antennas,” IEEE Proc., Oct. 2011.
[19] M. Rafaei Booket, A. Jafargholi, M. Kamyab, H. Eskandari, M. Veysi, and S. M. Mousavi, “A Compact Multi-Band Printed Dipole Antenna Loaded with Single-Cell MTM,” IET Microwave Antenna Propag., vol. 6, no. 1, pp. 17–23, 2012.
[20] A. Jafargholi, A. Jafargholi and B. Ghalamkari, "Dual-Band Slim Microstrip Patch Antennas," IEEE Trans. Antennas Propagat., vol. 66, no. 12, pp. 6818-6825, Dec. 2018.
[21] Z. Szabó, G. H. Park, R. Hedge, and E. P. Li, “A Unique Extraction of Metamaterial Parameters Based on Kramers–Kronig Relationship,” IEEE Trans. Microwave Theory Tech., vol. 58, no. 10, 2646–2653, Oct. 2010.
[22] A. O. Karilainen, P. M. T. Ikonen, C. R. Simovski, and S. A. Tretyakov, “Choosing Dielectric or Magnetic Material to Optimize the Bandwidth of Miniaturized Resonant Antennas,” IEEE Trans. Antennas Propagat., vol. 59, no. 11, 3991–3998, 2011.
[23] N. Amani, A. Jafargholi, “Internal Uni-Planar Antenna for LTE/WWAN/GPS/GLONASS Applications in Tablet/Laptop Computers”, IEEE Antennas Wirel. Propag. Lett., vol. 14, pp. 1654–1657, 2015.
[24] C. Hsu and S. Chung, "Compact Antenna With U-Shaped Open-End Slot Structure for Multi-Band Handset Applications," IEEE Trans. Antennas Propag, vol. 62, no. 2, pp. 929-932, Feb. 2014.
[25] X. Wang, Y. Wu, W. Wang, and A. A. Kishk, "A Simple Multi-Broadband Planar Antenna for LTE/GSM/UMTS and WLAN/WiMAX Mobile Handset Applications," IEEE Access, vol. 6, pp. 74453-74461, 2018.
[26] H. Liu, R. Li, Y. Pan, X. Quan, L. Yang, and L. Zheng, "A Multi-Broadband Planar Antenna for GSM/ UMTS/LTE and WLAN/WiMAX Handsets," IEEE Trans. Antennas Propag, vol. 62, no. 5, pp. 2856-2860, May 2014.