مطالعه موردی تأثیر فشار هوا و دما بر سامانه الکترواپتومکانیک به منظور دورسازی بخش انتشار امواج سامانه های مخابراتی از فرستنده-گیرنده

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشگاه یزد، دانشکده فیزیک، گروه اتمی ملکولی

2 دانشکده فیزیک دانشگاه یزد

3 دانشکده فیزیک، دانشگاه یزد

چکیده

دورسازی انتشار امواج (آنتن) از فرستنده-گیرنده بدون آنکه اختلالی در عملکرد سامانه‌های مبتنی بر انتشار امواج ایجاد کند، یکی از نیازهای کلیدی برای بسیاری از بهره‌برداران از جمله سازمان‌های نظامی، درمانی و متولیان تبادل اطلاعات و ارتباطات می‌باشد.در کنار همه مطالعات انجام شده برای دست‌یابی به این مهم، بهره‌گیری از سامانه‌های الکترواپتومکانیک، با طراحی و تدابیر خاص می-تواند یک راهبرد اساسی در این زمینه محسوب شود، اما بکارگیری آنها مستلزم آنست که در شرایط محیطی مختلف، بازدهی سامانه دچار اختلال نشود.دو عامل محیطی تأثیرگذار بر بازدهی، تأثیرتغییرات فشار هوا و دما است. در این مقاله تأثیر این دو عامل کلیدی، بصورت مطالعه موردی بر روی بازدهی یک سامانه‌ الکترواپتومکانیک، مورد بررسی و تجزیه تحلیل قرار گرفته و نشان داده می‌شود تأثیر تغییرات فشار هوا بر بازدهی سامانه‌ مورد مطالعه، بسیار قابل توجه است و تأثیر تغییرات دما بستگی به نوع دی‌الکتریک خازن سامانه دارد که در طراحی و ساخت آنها می‌بایست مد نظر قرار گیرد.

کلیدواژه‌ها


عنوان مقاله [English]

Case Study of the Effect of Air Pressure and Air Temperature on the Electro-optomechanical System in Order to Create More Distance Between the Antenna and the Transmitter-receiver in Communication Systems

نویسندگان [English]

  • mohammadmohsen atabaki 1
  • Abbas Behjat 2
  • Mohammad Kazem Tavassoly 3
  • M Hassani Nadiki 2
1 Department of Physics, Faculty of Science, Yazd University, Yazd, Iran
2 Faculty of Physics, Yazd University
چکیده [English]

Making distance between the antenna and the transmitter-receiver, without disrupting the performance of wave propagation systems, is a key requirement for many exploiters, including military, medical, and information and communication organizations.In addition to all the studies done to achieve this important goal, the use of electro-optomechanical systems with special design and measures can be considered as a basic strategy in this field, but their use requires that the efficiency of the system is not compromised in different environmental conditions. Two environmental factors affecting efficiency are the effect of changes in air pressure and temperature. In this paper, the effect of these two key factors, as a case study on the efficiency of an electro-optomechanical system, has been studied. The results show that the effect of changes in air pressure on the efficiency of the system under study is very significant and the effect of temperature changes depends on the dielectric type of the system capacitor, which must be considered in their design and construction.

کلیدواژه‌ها [English]

  • Radio-to-light waves conversion
  • Electro-optomechanical system
  • Efficiency
  • Air pressure
  • Temperature