طراحی شبیه‌ساز قسمتهای مختلف زیر سیستم تامین توان ماهواره

نویسندگان

1 دانشگاه صنعتی مالک اشتر، کارشناسی ارشد برق قدرت

2 دانشگاه صنعتی مالک اشتر، دکتری برق قدرت

3 عضو هیئت علمی دانشگاه صنعتی مالک اشتر

4 دانشجوی کارشناسی ارشد دانشگاه صنعتی مالک اشتر

چکیده

امروزه یکی از صنایع مهم و پرهزینه در جهان صنایع فضاییست که ساخت ماهواره‌ها از زیرمجموعه‌های آن به شمار می‌رود. از این رو بررسی رفتار و عملکرد ماهواره‌ها در فضا با توجه به در دسترس نبودن آنها اهمیت به سزایی پیدا می‌کند. از راه حلهای موجود در این زمینه، ساخت شبیه‌ساز جهت بررسی کارایی ماهواره‌ها در شرایط مختلف آزمایشگاهی است. یکی از قسمتهای مهم در ماهواره‌ها زیرسیستم تامین توان آنهاست، که خود از قسمتهای مختلفی تشکیل شده است. این قسمت از حیاتی‌ترین قسمتهای ماهواره می‌باشد. در این مقاله به طراحی شبیه‌ساز قسمتهای مختلف زیرسیستم تامین توان ماهواره اعم از سیستم فتوولتائیک، باتری و بار با توجه به مدلهای موجود پرداخته شده است. از آنجائیکه بررسی رفتار ماهواره‌ها در شرایط کار در فضا مشکل می‌باشد این سیستم می‌تواند در زمینه صنایع فضایی بسیار پرکاربرد باشد. این شبیه‌ساز براساس مدلهای کاربردی موجود قسمتهای مختلف زیرسیستم تامین توان ماهواره، در محیط سیمولینک نرم‌افزار MATLAB ، شبیه‌سازی شده و نتایج خروجی آن ارائه گردیده است. همچنین این شبیه‌ساز قابلیت شبیه‌سازی دنبال کننده حداکثر توان را نیز دارد و می‌تواند حداکثر توان ممکن را به سیستم تحویل دهد. جهت طراحی از اطلاعات یک پانل فتوولتائیک 200 واتی ساخت شرکت KYOCERA و باتری لیتیوم یونی ساخت شرکت Saft مدل MP 176065 Integration با ظرفیت 8/6 آمپرساعت استفاده شده است.

کلیدواژه‌ها


عنوان مقاله [English]

Design the simulator of the power supply subsystem of satellite

نویسندگان [English]

  • علی نهاری 1
  • سید مهدی موسوی بادجانی 2
  • اصغر ابراهیمی 3
  • مجتبی بیگلراحمدی 4
چکیده [English]

Today, one of the most important and expensive industries in the world is space industrument. Manufacturing the satellite is a part of this industry. Because of this reason, analyzing the behavior of satellites is too important. Not being accessible in the space causes to make the simulators of satellites. One of the most important subsystems in the satellite is the power supply subsystem. In this paper, it is tried to design the different part of the power supply subsystem of satellite simulators such as photovoltaic system, battery, electrical load. As it is difficult to analyze the behavior of satellites this simulator would be usefull in space industries. This simulator wouldn’t have the problem such as preparing the test condition, the cost of providing the different size of batteries and also age reducing batteries by using them. It is available to be expanded to different kind of battery. The battery which has been simulated in this paper is MP 176065 Integration 6.8 Ah Li-ion battery that is made by Saft Company and the photovoltaic panel is a 200 watt panel made by KYOCERA. This simulator can simulate the max power point tracker and gives the max power to the system.

کلیدواژه‌ها [English]

  • Electrical load
  • satellite
  • Photovoltaic system
  • Li-ion battery
  • simulator