طراحی و ساخت آنتن پهن باند با قابلیت تنظیم پذیری در قطبش دایروی برای استفاده در لینک‌های ارتباطی در باندهای L و S

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشکده مهندسی برق- دانشگاه هوایی شهید ستاری-تهران-ایران

2 دانشکده مهندسی برق، دانشگاه شاهد

چکیده

این مقاله ، آنتن‌های پهن باند با قابلیت تنظیم پذیری در قطبش دایروی برای استفاده در لینک‌های ارتباطی پیشنهاد شده است. برای دستیابی به پهنای باند امپدانسی وقطبش دایروی نسبتا خوب، المانی پیشنهاد شده ست که دارای یک پچ هلالی شکل و دوخط تغذیه L-شکل می‌باشد. آنتن‌های پیشنهادی این قابلیت را دارند که می‌توانند با استفاده از یک سوئیچ RF که در شبکه تغذیه قرار می‌گیرد، قطبش دایروی چپ-گرد یا راست-گرد ایجاد کنند. دو ساختار تحلیل و شبیه سازی شده‌اند. ساختار اول که یک آنتن منفرد می‌باشد و یک نمونه از آن نیز ساخته شد، دارای پهنای باند اندازه گیری شده امپدانسی 62% (S11<-10dB)و نسبت محوری 49% (AR<3dB) می‌باشد. ساختار دوم یک آنتن آرایه‌ای 2 عنصره با پچ هلالی شکل و تغذیه L-شکل می‌باشد. در این آرایه از روش تغذیه چرخش متوالی استفاده شده است. با توجه به نتایج شبیه سازی شده ارائه شده، پهنای باند امپدانسی و AR آنتن آرایه‌ای به ترتیب 67% (1.31-2.62GHz) و 60% (1.3-2.4GHz) بدست آمده که نسبت به آنتن واحد بیشتر هست. ماکزیمم گین آنتن آرایه‌ای حدود 10dB در پهنای باند موثر می‌باشد. این آنتن‌ها می‌توانند در لینک‌های ارتباطی، سیستم‌های شنود و فریب باندهای L و S استفاده شوند.

کلیدواژه‌ها


عنوان مقاله [English]

Design and Fabrication of the Wideband Circular-Polarization Antenna with Reconfigurable Capability for Communication Links in L and S Bands

نویسندگان [English]

  • Morteza Mohammadi Shirkolaei 1
  • Majid Jafari 2
1 Department of Electrical Engineering, Shahid Sattari Aeronautical University of Science and Technology, Tehran, Iran
2 Department of Electrical Engineering, Shahed University
چکیده [English]

In this paper, broadband antennas with reconfigurable capability in circular polarization are presented for use in communication links. To achieve the impedance bandwidth and its relatively good circular motion, a German has been proposed that has a falcate patch and two L-shaped probes for feed lines. The proposed antennas can create a left-hand or right-hand circular polarization using an RF switch located in the feeding network. The two structures are analyzed and simulated. The first structure, which is a single antenna and a sample of which was made, has a measured impedance bandwidth 62% (S11 <-10dB) and 3dB axial ratio 49% (AR <3dB). The second structure is an array antenna 1*2 with two falcate patches, four L-shaped probes, and two Wilkinson power dividers. In this array, sequential rotation feeding networks used for enhancement axial ratio bandwidth. According to the simulated results, the impedance bandwidth and AR of the array antenna are 67% (1.31-2.62GHz) and 60% (1.3-2.4GHz), respectively, which is wider than the single antenna. The maximum gain of the array antenna is 10dB in effective bandwidth. These antennas can be used in communication links, electronic support measurement, jamming systems in L and S bands.

کلیدواژه‌ها [English]

  • Falcate patch antenna
  • L-shaped probe
  • circular polarization
  • reconfigurable