طراحی و پیاده سازی مدار برنامهریز بهبود یافته برای کاهش اثر فراجهش با تکنیک پوزیکست

نویسنده

کارشناس ارشد برق الکترونیک، دانشگاه شاهد

چکیده

در این مقاله یک مدار قابل برنام هریزی برای ساخت پالس پوزیکست ارائه شده است. در این طرح ابتدا، پالس اصلی تأخیر داده می شود، سپس پالس اصلی و تأخیر یافته توسط جمع کننده جمع می شوند. در مدار تأخیر ارائه شده، تأخیر در لبه بالارونده و پایین رونده با دو مجموعه کد متفاوت کنترل می شود. همچنین در مدار جمع کننده ارائه شده، سطوح اول ولتاژ پالس پوزیکست در لبه بالارونده و پایین رونده با دو مجموعه کد ورودی متفاوت کنترل می شود. با ترکیب کردن مدار تأخیر و مدار جمع کننده، یک مدار قابل برنامه ریزی برای ساخت پالس پوزیکست ارائه شده است. نتایج شبیه سازی نشان می دهد که مدارات تأخیر و جمع کننده به صورت خطی نسبت به کد ورودی عمل می کنند . در نهایت پالس پوزیکست ساخته شده بر روی مدار RLC اعمال شده است و نتایج شبیه سازی نشان می دهد که در مدار RLC ، متوسط کاهش فراجهش در لبه های بالارونده و پایین رونده به ترتیب برابر 78 / 91 % و 56 / 98 % است. همچنین متوسط بهبود زمان نشست در این لبه ها برابر 7/ 70 % و 47 / 90 % است.

کلیدواژه‌ها


عنوان مقاله [English]

Design and Implementation of an Improved Programmable Circuit for Overshoot Reduction byPosicastTechnique

نویسنده [English]

  • a b
چکیده [English]

In this paper a programmablecircuitis presentedfor generationPosicast pulse. In this
scheme first, the original pulse is delayed, and then the original and delayed pulse is
added with adder circuit. In the presented delay circuit, delays at rising and falling edges
are controlled with two different input code words. Also, in the presented adder circuit,
the first levels of voltage at rising and falling edges are controlled with two different
input code words. A programmable circuit for generation Posicast pulse is proposed
with composition of delay and adder circuits. Our experimental results show that the
proposed delay and adder circuits work linearly respects to the code word. Finally the
output of the programmable circuit is applied on the RLC circuit, the average of
overshoot reduction at rising and falling edges are 91.78% and 98.56%, respectively.
Also, the average of settling time improvement in these edges is 70.7% and 90.47%,
respectively.

کلیدواژه‌ها [English]

  • Overshoot
  • Posicast
  • Time Response
  • Settling Time