پیاده سازی بهینه دکدرQC-LDPC با توان عملیاتی بالا بر پایه الگوریتم دکدینگ لایه‌بندی‌شده

نویسندگان

1 تربیت مدرس

2 دانشگاه تربیت مدرس

چکیده

در این مقاله یک دکدر با توان عملیاتی بالا برای کدهای QC-LDPC ارائه شده است. بر پایه الگوریتم دکدینگ لایه‌بندی شده، یک تکنیک جدید بر اساس همزمانی پردازش سطرها و ستون‌ها ارائه شده است که از تعداد تکرارها کاسته می‌شود و در نتیجه توان عملیاتی افزایش می‌یابد. دکدر پیشنهادی برای طول کدهای متغیر با نرخ 2/1 و تعداد 7 بیت کوانتیزیشن در استاندارد e16/802 ارائه شده است. بر پایه طرح پیشنهادی، دکدر QC-LDPC برای طول کد 2304، با استفاده از نرم-افزار Design Compiler و در تکنولوژی 130 نانومتر CMOS سنتز شده است. نتایج به‌دست آمده نشان می‌دهد با میزان توان مصرفی mW 156.39 و سطح تراشه2mm5.09 می‌توان به توان عملیاتی Mb/s198در فرکانس کاری MHz100 و حداکثر 10 تکرار دست یافت.

کلیدواژه‌ها


عنوان مقاله [English]

Optimum Implementation of a high-Throughput QC-LDPC Decoder Based on Layered Decoding

نویسندگان [English]

  • ابومسلم جان نثاری 1
  • طاهره حیدری 2
چکیده [English]

This paper presents a high throughput decoder for QC-LDPC codes. In the proposed architecture, based on layered min sum decoding, a novel technique for simultaneous process of rows and columns is presented, that reduced the number of clock cycles in per iteration and as result the throughput is increasing. The proposed decoder is presented for any code length (576:96:2304), in code rate 1/2 and 7-bit quantization in 802.16e standard. Based on proposed decoder, QC-LDPC decoder is synthesized for code length 2304, on 130 nm CMOS technology by Synopsys Design Compiler. The obtained results in the operating frequency of 100 MHz and 10 iterations show that the maximum throughput is 198 Mb/s and total power consumption of 156.39mW and chip area of 5.09 mm2.

کلیدواژه‌ها [English]

  • semi-parallel architecture
  • Layered decoding algorithm
  • QC-LDPC codes
  • Low density parity check code